36W Hot sale model LXCP36 12V 3A medical AC/DC Power adapters for infusion pump LXCP36
Input Characteristics
Input Voltage:
Nominal Voltage: 100～240Vac
Variation Range: 90～264Vac
Input Frequency:
Nominal Frequency: 50/60Hz.
Variation Frequency: 47～63Hz
Input Current:
0.8Amps max at any input voltage and rated DC output and rated load.
Inrush Current:
60Amps Max. Cold start at 264Vac input, with rated load and 25℃ ambient.
AC Leakage Current:
Normal 0.5mA Max.at 264Vac input.
Single fault 1.0mA Max.at 264Vac input.
Output Characteristics
Model name |
Output Voltage(V) |
Rated Load (A) |
Output Range(V) |
Over current protection(A) |
Efficiency (%) |
Output power(W) |
LXCP36-050 |
5.0 |
4.00 |
4.40~5.60 |
≤8.0 |
70 |
20.0 |
LXCP36-075 |
7.5 |
4.00 |
6.90~8.10 |
≤8.0 |
70 |
30.0 |
LXCP36-090 |
9.0 |
4.00 |
8.40~9.60 |
≤8.0 |
72 |
36.0 |
LXCP36-120 |
12.0 |
3.00 |
11.40~12.60 |
≤6.0 |
80 |
36.0 |
LXCP36-135 |
13.5 |
2.66 |
12.90~14.10 |
≤5.0 |
80 |
36.0 |
LXCP36-150 |
15.0 |
2.40 |
14.40~15.60 |
≤5.0 |
80 |
36.0 |
LXCP36-168 |
16.8 |
2.14 |
16.20~17.40 |
≤4.0 |
80 |
36.0 |
LXCP36-180 |
18.0 |
2.00 |
17.40~18.60 |
≤4.0 |
80 |
36.0 |
LXCP36-190 |
19.0 |
1.89 |
18.40~19.60 |
≤3.6 |
80 |
36.0 |
LXCP36-200 |
20.0 |
1.80 |
19.40~20.60 |
≤3.6 |
80 |
36.0 |
LXCP36-240 |
24.0 |
1.50 |
23.40~24.60 |
≤3.0 |
80 |
36.0 |
Line Regulation |
±3% |
|||||
Load Regulation |
±8% |
|||||
Ripple and Noise
At nominal voltage and rated load, the ripple and noise measure less than 200mVp-p when using a maximum bandwidth of 20MHz and connecting a parallel 10uF/0.1uF at the testing point.
Turn on delay time
3 Second Max.at 220Vac input and output rated load.
Rise time
50mS Max.at 115Vac input and output rated load.
Hold up time
5mS Min.at 115Vac input and output rated Load.
Protection Function
Short circuit test
The power supply will be auto recovering when the short circuit faults removed.
Over current Protection
The power supply will enter a stop mode if the IC's temperature exceeds its trigger point. It will automatically recover when the IC temperature falls below the regulation value.
Environmental Requiremet
Operating Temperature
0℃ to 40℃,Rated load, Normal operation.
Storage Temperature:-20℃ to 80℃
With package
Storage Humidity: 10%～90%
With Package
Atmospheric pressure
70-106KPa, Normal.
Altitude
5000m,Work temp descend 1℃ every 300m over 5000m.
(9~200Hz,Acceleration 5m/S2)
Transportation: 5-9Hz, A=3.5mm
Acceleration=5m/S2
Acceleration=15m/S2
Axes, 10 cycles per axis
Testing should not result in any permanent damage.
The power supply can be restored to normal operation by power cycling.
Dropping Packed
As described above, the wall mount type requires a 1m distance, while the desktop type requires a 760mm distance.
The horizontal surface should be constructed with hardwood at least 13mm thick, mounted on two layers of plywood, and positioned 19mm to 20mm away from the edge.
Relative Humidity
5%(0℃) ～90%(40℃)RH, 72Hrs, Rated load, Normal operating.
MTBF
The power supply is expected to have a minimum predicted MTBF (MIL-STD-217F) of 100,000 hours under normal operating conditions and typical usage.
Electromagnetic Compatiblity
Number |
Item |
Specifications |
Class |
Standards |
1 |
CE |
CLASS B |
/ |
IEC/EN60601-1-2; YY0505 GB4824; EN55011; FCC Part 18 |
2 |
RE |
CLASS B |
/ |
IEC/EN60601-1-2; YY0505 GB4824; EN55011; FCC Part 18 |
3 |
SURGE |
Line to line±1KV |
A |
IEC/EN60601-1-2; YY0505 IEC/EN61000-4-5; GB17626.5 |
Line to GND±2KV |
A |
|
||
4 |
ESD |
Air discharge±15KV |
A |
IEC/EN60601-1-2; YY0505 IEC/EN61000-4-2; GB17626.2 |
Contact discharge±8KV |
A |
|
||
5 |
EFT/B |
±2KV (BURST FREQUENCY=100KHZ) |
A |
IEC/EN60601-1-2; YY0505 IEC/EN61000-4-4; GB17626.4 |
6 |
DIP |
Dropped to 0%Ut，last 5000ms(250cycle) |
B |
IEC/EN60601-1-2; YY0505 IEC/EN61000-4-11; GB17626.11 |
Dropped to 30%Ut，last 500ms(25 cycle) |
B |
|
||
Dropped to 0%Ut，last 20ms(1 cycle) |
B |
|
||
Dropped to0%Ut，last 10ms(0.5 cycle) |
A |
|
||
7 |
RS |
Test frequency：80MHz～2700MHz； Field intensity：10V/m； Amplitude modulation：80%AM(1KHz) |
A |
IEC/EN60601-1-2; YY0505 IEC/EN61000-4-3; GB17626.3 |
8 |
CS |
Test frequency：0.15MHz～80MHz； Field intensity：6Vrms； Amplitude modulation：80%AM(1KHz) |
A |
IEC/EN60601-1-2; YY0505 IEC/EN61000-4-6; GB17626.6 |
9 |
THD |
CLASSA(in system) |
/ |
IEC/EN60601-1-2; YY0505 IEC/EN61000-3-2; GB17625.1 |
10 |
Voltage Fluctuation and Flicker |
Pst≤1.0;Plt≤0.65;Relative steady-state voltage variation dc under3.3%;Maximum relative voltage variation (dmax) under4% |
/ |
IEC/EN60601-1-2; YY0505 IEC/EN61000-3-3; GB17625.2 |
11 |
Frequency Magnetic Field |
30A/m |
A |
IEC/EN60601-1-2; YY0505 IEC/EN61000-4-8; GB17626.8 |
Safety: accord with
ITEM |
COUNTRY |
STANDARD |
|
□ |
UL |
USA |
UL60950-1/UL60601-1 |
■ |
CE |
EUROPE |
EN60950-1/EN60601-1 |
■ |
CB |
WORLDWIDE |
IEC60601-1 |
□ |
TUV |
GERMANY |
IEC60601-1 |
■ |
NRTL |
CUSA |
IEC60601-1/UL60601-1 |
□ |
GS |
GERMANY |
EN60601-1 |
□ |
BS |
ENGLAND |
EN60601-1 |
□ |
SAA |
AUSTRALIA |
AS/NZS6-1 |
Mechanical Requirement
Cable
detachable the power supply size: L 80.0 x W44.0 x H 38.1mm;
optional DC plug
label size：34mm*26mm
