36W 100~240V 50-60Hz Power supply adaptor folded plug US plug Deatchable AC plug LXCP37
Input Characteristics
Input Voltage:
Nominal Voltage: 100～240Vac
Variation Range: 90～264Vac
Input Frequency:
Nominal Frequency: 50/60Hz.
Variation Frequency: 47～63Hz
Input Current:
0.9Amps max at any input voltage and rated DC output and rated load.
Inrush Current:
60Amps Max. Cold start at 264Vac input, with rated load and 25℃ ambient.
AC Leakage Current:
Normal 0.1mA Max.at 264Vac input.
Sing le fault 0.2mA Max.at 264Vac input.
Output Characteristics
Model name |
Qutput voltage(V) |
Rated load(A) |
Output range(V) |
Over current protection(A) |
Efficien cy (%) |
Output power(W) |
LXCP37-050 |
5.0 |
6.00 |
4.40~5.60 |
≤12.0 |
70 |
30.0 |
LXCP37-075 |
7.5 |
4.80 |
6.90~8.10 |
≤9.6 |
70 |
36.0 |
LXCP37-090 |
9.0 |
4.00 |
8.40~9.60 |
≤8.0 |
72 |
36.0 |
LXCP37-120 |
12.0 |
3.00 |
11.40~ 12.60 |
≤6.0 |
82 |
36.0 |
LXCP37-135 |
13.5 |
2.66 |
12.90~ 14.10 |
≤5.0 |
82 |
36.0 |
LXCP37-150 |
15.0 |
2.40 |
14.40~ 15.60 |
≤5.0 |
82 |
36.0 |
LXCP37-168 |
16.8 |
2.14 |
16.20~ 17.40 |
≤4.0 |
82 |
36.0 |
LXCP37-180 |
18.0 |
2.00 |
17.40~ 18.60 |
≤4.0 |
84 |
36.0 |
LXCP37-190 |
19.0 |
1.89 |
18.40~ 19.60 |
≤3.6 |
84 |
36.0 |
LXCP37-200 |
20.0 |
1.80 |
19.40~20.60 |
≤3.6 |
84 |
36.0 |
LXCP37-240 |
24.0 |
1.50 |
23.40~24.60 |
≤3.0 |
84 |
36.0 |
Line regulation |
±3% |
|||||
Load regulation |
±8% |
|||||
Ripple and Noise
Under nominal voltage and rated load, the ripple and noise are less than 200mVp-p when measure with Max. Bandwidth of 20MHz and parallel 10uF+0.1uF, connected at testing point.
Turn on delay time
3 Second Max.at 220Vac input and output rated load.
Rise time
50ms Max.at 115Vac input and output rated load.
Hold up time
5mS Min.at 115Vac input and output rated Load.
Efficiency:
70% Min, at 115/230Vac input voltage, rated load，Test USB end of power supply
Protection Function
Short circuit test
The power supply will be auto recovering when short circuit faults removed.
Over current Protection
When the output current exceeds 110% to 200% of the rated current, the power supply will activate protection. Once the overcurrent fault is resolved, the power supply will automatically restore operation.
Over Voltage Protection
When the IC's temperature exceeds its trigger point, the power supply will enter stop mode. Once the IC temperature falls below the regulation value, the power supply will automatically recover.
Environmental Requiremet
Operating Temperature
0℃ to 40℃,Rated load, Normal operation.
Storage Temperature:-20℃ to 80℃
With package
Storage Humidity: 10%～90%
No condensation
Atmospheric pressure
70-106KPa, Normal.
Altitude
5000m,Work temp descend 1℃ every 300m over 5000m.
Transportation: 5-9Hz, A=3.5mm
Acceleration=5m/S2
Acceleration=15m/S2
Axes, 10 cycles per axis
No permanent damage may occur during testing.
The Power supply can be restore to normal after power off/on.
Dropping Packed
The wall mount type requires 1m, and the desktop type requires 760mm, as described above.
The horizontal surface should be made of hardwood at least 13mm thick, mounted on two layers of plywood, and positioned 19mm to 20mm away from the edge.
Relative Humidity
5%(0℃) ～90%(40℃)RH, 72Hrs, Rated load, Normal operating.
MTBF
The power supply is expected to have a minimum Mean Time Between Failures (MTBF) of 100,000 hours under normal operating conditions and typical usage.
Electromagnetic Compatiblity
Numbe |
Item |
Specifications |
Class |
Standards |
1 |
(CE) |
CLASS B |
/ |
IEC/EN60601-1-2; YY0505 GB4824; EN55011; FCC Part 18 |
2 |
(RE) |
CLASS B |
/ |
IEC/EN60601-1-2; YY0505 GB4824; EN55011; FCC Part 18 |
3 |
(SURGE) |
Line to line±1KV |
A |
IEC/EN60601-1-2; YY0505 IEC/EN61000-4-5; GB17626.5 |
|
|
Line to GND±2KV |
A |
|
4 |
（ESD） |
Air discharge±15KV |
A |
IEC/EN60601-1-2; YY0505 IEC/EN61000-4-2; GB17626.2 |
|
|
Contact discharge±8KV |
A |
|
5 |
(EFT/B) |
±2KV (BURST FREQUENCY=100KHZ) |
A |
IEC/EN60601-1-2; YY0505 IEC/EN61000-4-4; GB17626.4 |
6 |
（DIP） |
Dropped to 0%Ut，last 5000ms(250cycle) |
B |
IEC/EN60601-1-2; YY0505 IEC/EN61000-4-11; GB17626.11 |
Dropped to 30%Ut，last 500ms(25 cycle) |
B |
|
||
Dropped to 0%Ut，last 20ms(1 cycle) |
B |
|
||
Dropped to0%Ut，last 10ms(0.5 cycle) |
A |
|
||
7 |
（RS） |
Test frequency：80MHz～2700MHz； Field intensity：10V/m；80%AM(1KHz) Amplitude modulation：80%AM(1KHz) |
A |
IEC/EN60601-1-2; YY0505 IEC/EN61000-4-3; GB17626.3 |
8 |
（CS） |
Test frequency：0.15MHz～80MHz； Field intensity：6Vrms； Amplitude modulation：80%AM(1KHz) |
A |
IEC/EN60601-1-2; YY0505 IEC/EN61000-4-6; GB17626.6 |
9 |
(THD) |
CLASSA(in system) |
/ |
IEC/EN60601-1-2; YY0505 IEC/EN61000-3-2; GB17625.1 |
10 |
Voltage Fluctuation and Flicker |
Pst≤1.0;Plt≤0.65;Relative steady-state voltage variation dc under3.3%;Maximum relative voltage variation (dmax) under4% |
/ |
IEC/EN60601-1-2; YY0505 IEC/EN61000-3-3; GB17625.2 |
11 |
Power Frequency Magnetic Field |
30A/m |
A |
IEC/EN60601-1-2; YY0505 IEC/EN61000-4-8; GB17626.8 |
Safety: accord with
ITEM |
COUNTRY |
STANDARD |
|
□ |
UL |
USA |
UL60950-1/UL60601-1 |
□ |
CE |
EUROPE |
EN60950-1/EN60601-1 |
□ |
CB |
WORLDWIDE |
IEC60601-1 |
□ |
TUV |
GERMANY |
IEC60601-1 |
□ |
NRTL |
CUSA |
IEC60601-1/UL60601-1 |
□ |
GS |
GERMANY |
EN60601-1 |
□ |
BS |
ENGLAND |
EN60601-1 |
□ |
SAA |
AUSTRALIA |
AS/NZS6-1 |
Mechanical Requirement
![LF~$SNHHN]C(A~~@~F3A[9Mhs0](https://ecdn6.globalso.com/upload/p/1150/image_other/2024-04/660bc268a93bf89956.jpg)
optional DC plug
Label
Certificate
Our company has passed ISO 9001:2015, ISO 13485:2016 quality management system certification, products and production process to achieve RoHS environmental protection requirements, in line with ISO14001 environmental management system; Our products have passed UL, CE, CSA, TUV, CB and other certifications, and they are exported to the United States, Britain, Germany, France, Italy, Singapore, Argentina, Brazil, India and other countries.